1.3 Telephone Features and Operation
32 Operating Manual
1.3.7 Call Monitor
A preprogrammed extension user can listen to the ongoing conversation of a busy extension user.
To monitor
1.3.8 Call Park
You can put a call on hold in a common parking zone of the PBX so that any extension can retrieve the
parked call. You can use this feature as a transferring feature.
A call can be put into either a specified parking zone (Specified) or any idle parking zone (Auto). If a Call
Park button and Call Park (Automatic Park Zone) button have been established, you can select either way
to park by simply pressing the corresponding button.
When a call is parked automatically, or more than one call has been parked at the same time, you need to
specify the parking zone number to retrieve the required call.
To set
• For simple operation, you can automatically hold a call by pressing another CO, ICD Group
or INTERCOM button, only if preprogrammed (Automatic Call Hold). For more details, refer
to the Feature Manual.
PT/SLT/PS
Enter
5
.
5
extension no.
Dial
extension
number
.
B.Tone
Off-hook.
C.Tone
Monitoring starts
During a conversation
Press
Call Park
.
PT/PS
(Call Park)
To Next Page
Loading...
