1.3 Telephone Features and Operation
84 Operating Manual
Paging Deny
You can set your extension not to receive paging announcements.
1.3.41 Printing Message
You can record a variety of information from your extension using up to 8 preprogrammed messages.
Message information from all extensions is recorded with the PBX. For example, it is possible to use this
feature as a time card by selecting preprogrammed "sign in" and "sign out" messages.
In a hotel-type environment, this feature can be used to record room information from a room extension.
For a list of preprogrammed messages, consult your dealer.
To record
• * Depending on the content of the selected message, you may be required to enter a numeric
parameter, such as a price or time. Enter the correct number of characters as required for the
message. For information about required parameters, consult your dealer.
<Example>
If "Snack %%.%%" has been programmed as message number 1 (for recording charges for
room snacks consumed), hotel employees would enter data as in the example below using
the room extension:
• When a preprogrammed message is selected, detailed information is recorded automatically,
as shown below:
Off-hook. On-hook.
PT
Enter
721
.
Deny
Allow
1
0
Enter
1
or
0
.
7 2 1
C.Tone
OR
Off-hook.
On-hook.
Enter
761
. Enter
message
number
(1-8).
Enter
parameter
if required.*
PT/SLT
parameter
Enter
#
.
761
message no.
C.Tone
761 1 0300 #
message no.
parameter
(Snack charge)
Date Time Ext CO Dial Number
10:45AM
1234 Snack 03.00
02/02/00
To Next Page
Loading...
