Panasonic KX-TD1232 - Direct Station Dialing

811
49
l
Resource Programming
DISA User Codes*
Description
Assigns the DISA User Codes and assigns a Class of Service
(COS) to each code. The COS of the code determines the toll
restriction level of the DISA caller.
Selection
l DISA user code number: 1 through 4
l DISA user code: 4 digits
l COS number: 1 through 8
Default
Code l=llll -COS 1;
Code
2=2222
- COS 1;
Code 3=3333 - COS 1;
Code 4=4444 - COS 1
Programming
1.
2.
3.
4.
5.
6.
7.
8.
9. Repeat steps 4 through 8.
10.
Press END.
Conditions
Enter 811.
Display:
DISA User Code
Press NEXT.
Display: User Code NO?->
Enter a DISA user code number.
To enter user code number 1, you can also press NEXT.
Display example Codel:llll COS:l
Enter a DISA user code.
To change the current entry, enter the new code.
Press + to program COS.
Enter a COS number.
To change the current entry, enter the new COS number.
Press STORE.
To program another user code, press NEXT or PREV, or
SELECT and the desired DISA user code number.
l This setting is required if Trunk (CO line) -Security mode is selected in
program [809] “DISA Security Type.”
l There are four programmable user codes. Each code should be unique,
composed of four numerical digits, 0 through 9.
l You cannot leave the entry empty.
Feature References
Section 3, Features,
Direct Inward System Access (DISA)
4-124 System Programming
*: Available for KX-TD 1232 only.