510
System Programming
Night Service Access
Description
Enables or disables switching
Service (COS) basis.
Selection
l
COS number:
1 through 8,
. Enable / Disable
Default
All COS - Disable
Programming
1.
Conditions
2.
3.
4.
5.
6.
7.
Repeat steps 4 through 6.
8.
Press END.
Enter
510.
the Day/Night service on a Class of
( * =a11 COS)
Display:
510 NITE SERVICE
Press NEXT.
Display:
COS NO?+
Enter a COS
number.
To
enter
COS
number 1,
you can also press
NEXT.
Display example: COSl: Disable
Keep pressing.SELECT until the desired selection is
displayed.
Press STORE.
To program another COS, press
NEXT
or
PREV,
or
SELECT
and the desired COS
number.
l
To assign ail COS to one selection, press the
key in step 3. In this
case, the display shows the contents programmed for COS 1.
l
The operator extension can switch the mode regardless of setting.
l
Program [601] “Class of Service” is used to assign-a Class of Service to
each extension.
Feature References
Section
3,
Features
Night Service
12
To Next Page
Loading...
