Panasonic KX-TD1232 - Default Values

52
0
Default Values
I :
;3 LX
/
r
Address
Program
Default
[602] Extension Group Assignment
All Jacks- 1/2=Extension Group 1
[603]-[604] DIL 1:N Extension and Delayed
All Jacks-1/2=All CO Lines= Immediate
Ringing-Day/Night
Ringing-Day/Night
[605]-[606] Outgoing Permitted CO Line All Jacks- 1/2=All CO Lines=Enable-Day/
Assignment-Day/Night
Night -
[607]-[608] Doorphone Ringing Assignment
Jack 01-l= All Doorphones; Other Jacks=No
-Day/Night
Door-phone-Day/Night
[609] Voice Mail Access Codes
Not Stored
Resource Programming
[800] SMDR Incoming / Outgoing Call Log Outgoing Calls=All; Incoming Calls=On
Printout
[80 l] SMDR Format Page Length=66; Skip Perforation=0
[802] System Data Printout
Not Applicable
[803] Music Source Use
Hold and BGM=Music 1
[804] External Pager BGM
All External Pagers=Disable
[805] External Pager Confirmation Tone On
[806]-[807] EIA (RS-232C) Parameters New Line Code=CR+LF; Baud Rate=9600;
Word Length=8; Parity Bit=Mark; Stop Bit=1
- Portl/Port2
[809]* DISA Security Type
Non Security
[8 lo]* DISA Tone Detection
Enable
[S 1 l]* DISA User Codes Code l=l 11 l=COS 1; Code 2=2222=COS 1;
Code 3=3333=COS 1; Code 4=4444=COS 1
[8 121” DISA DTMF Repeat Dial and Call=Repeat
[8 131 Floating Number Assignment l KX-TD816: Pager 1=196
l KX-TD1232: Pager 1=196; Pager 2=197;
Pager 3=296; Pager 4=297; DISA 1=198;
DISA 2=298; MODEM=299
[ 8 14]* Modem Standard
BELL
Option Programming
[990] System Additional Information See pages 4- 130 through 4- 132.
[99 l] COS Additional Information See page 4- 134.
[992] CO Line Group Additional
Not Applicable
Information
$: Available for KX-TD 1232 only.
List 5-7