c
3
Features
Class of Service (COS)
Description
COS
is used to define the features which are allowed for a group of
extensions. Each extension is assigned a COS number. Eight
Classes of Service are available.
Conditions
l
A list of the programmable items is given below:
(1)
(2)
(3)
(4)
(5)
(6)
(7)
The ability to forward a call to an outside party - enable /
disable
The ability to transfer a call to an outside party - enable /
disable
The ability to override Do Not Disturb of the called station -
enable / disable
Account Code Entry operation - verified
-
all calls / verified
-
toll restriction override / option
Executive Busy Override - enable / disable
Executive Busy Override Deny - enable / disable
Outgoing call restriction level (Day mode / Night mode) - 1
through 8
(8)
Restriction of CO call duration - enable / disable
(9)
The number of permitted dialing digits during a CO call
(10) The ability to set Call Forwarding - Follow Me - enable /
disable.
l
A Class of Service can be assigned to a DISA* user code.
Programming References
Section 4, System Programming,
[500]-[501]
Toll Restriction Level - Day / Night
[5021
Extension-to-CO Line Call Duration Limit
[5031
Call Transfer to CO Line
[5041
Call Forwarding to CO Line
[505]
Executive Busy Override
[5W
Executive Busy Override Deny
[5071
Do Not Disturb Override
W31
Account Code Entry Mode
[6011
Class of Service
F3111
DISA User Codes*
[9911
COS Additional Information
Feature References
None
Operation References
Not applicable.
:
Features
*: Available for KX-TD1232 only.
To Next Page
Loading...
