How to fix noise when using Panasonic PBX PS?
If you are experiencing noise or disconnections while using the PS, it could be due to call handover not working or the PS being out of CS coverage area. Locate the CS properly.
Why can't I hear anything on Panasonic KX-TDA0108 speakerphone?
If when using the speakerphone on an APT, nothing is audible, or when using the speakerphone/monitor mode with a DPT, nothing is audible, it could be because the HANDSET/HEADSET selector is set to the "HEADSET" position, or the "HEADSET" mode is selected by Personal Programming. When the headset is not used, set the HANDSET/HEADSET selector to the "HANDSET" position or select the "HANDSET" mode by Personal Programming.
Why can't I transfer calls on my Panasonic KX-TDA0108?
If originating an outside call, call transfer, or conference cannot be performed, it is possible that the corresponding CO button does not exist on the PT. Program the CO button.
Why aren't alternate calling features working on my Panasonic KX-TDA0108 wireless phone?
Alternate Calling—Ring/Voice and Live Call Screening (LCS) do not function as set when using a Wireless Phone (KX-T7880/ KX-T7885/KX-TD7894/KX- TD7895) because voice-calling mode and Hands-free mode with LCS are not available with Wireless Phones. Switch the calling mode to ring-calling or set the LCS mode to "Private".
General| Compatibility | Panasonic KX-TDA series PBX |
|---|---|
| Display | N/A (This is a control card, not a phone) |
| Line Keys | N/A (This is a control card, not a phone) |
| Programmable Keys | N/A (This is a control card, not a phone) |
| Speakerphone | N/A (This is a control card, not a phone) |
| Headset Jack | N/A (This is a control card, not a phone) |
| Power Supply | Via PBX system |
Overview of key features and capabilities of the Hybrid IP-PBX system.
Details on the physical components and architecture of the basic system.
Technical details, performance characteristics, and physical specifications of the system.
Essential preliminary steps, safety, and wiring precautions before system installation.
Step-by-step instructions for unpacking, mounting, and installing the main unit.
Details on installing various types of trunk interface cards for external line connectivity.
Instructions for installing cards that provide connectivity for internal telephones and devices.
Initial setup and startup procedures for the Hybrid IP-PBX system.
Introduction to the KX-TDA Maintenance Console software and its purpose.
Details on how to connect the PC to the Hybrid IP-PBX using serial or LAN interfaces.
Step-by-step guide for installing the maintenance console software on a PC.
Common problems and solutions related to the initial setup and installation process.
Addresses issues related to incorrect wiring or port connections for extensions and trunks.
Solutions for problems encountered during the normal use of the system's features.
Records changes and updates made to the manual across different versions.
To Next Page