4.2 Programming the VoIP Gateway Card in the Los Angeles Office
30 Getting Started
Note
If you finish a programming session without logging out from the card (e.g., quitting
Internet Explorer, or returning to the log-in screen with the "Back" button of Internet
Explorer), you cannot log in again for the period of time specified by the parameter
Programming Auto Disconnect Time (default: 10 min).
For the log-out procedure and Programming Auto Disconnect Time setting, refer to
"2.5.2 Log Out" and "2.3.2 Maintenance Settings" of the VoIP Gateway Card Programming
Guide, respectively.
The main menu appears.
Note
For readability of the text on the screen,
it is recommended that you adjust the
text size of Internet Explorer to below
medium.
To Next Page
Loading...
