B2 Programming for the Extension Number Method
66 Getting Started
Programming the VoIP Gateway Card in the Chicago Office
Create hunt patterns with the setting values shown below, following the procedure in
"Assigning the Hunt Pattern" under "4.3 Programming the VoIP Gateway Card in the Chicago
Office".
B2.2 Programming the PBX
The steps below are provided in substitution for steps 6 and 7 of the procedure detailed in "5.1
Programming the PBX in the Los Angeles Office" and "5.2 Programming the PBX in the
Chicago Office". Program the PBXs in both offices using the extension number method,
following these steps.
Programming the PBX in the Los Angeles Office
Step 6
Assign the PSTN trunk (CO line) access number:
In the Idle Line Access (Local Access) box, type 92 (for Los Angeles office PSTN access).
To Next Page
Loading...
