4.3 Programming the VoIP Gateway Card in the Chicago Office
Getting Started 43
Note
For more details about uploading the address translation table, refer to "2.4.3 Upload of
Address Translation Table" of the VoIP Gateway Card Programming Guide.
Confirming the IP Address Assignment
Note that the card in the Chicago has been assigned a different IP address from the card in the
Los Angeles office.
1. Set the IP address settings of the PC to the following values:
• IP address: 199.176.64.100
• Subnet Mask address: 255.255.255.0
2. Start Internet Explorer from the Start menu.
3. In the Address box of Internet Explorer, type http://199.176.64.41 (the new IP address of
the card).
4. Press the ENTER key on the keyboard.
If you can log in, then the card has been successfully programmed.
After you have confirmed that the card has been successfully programmed, it is strongly
recommended that you download the configuration data from the card and save it on your PC
for backup and archive purposes.
The procedure for downloading the configuration data is provided in "2.4.2 Download of
Configuration Data" of the VoIP Gateway Card Programming Guide.
To Next Page
Loading...
