1.6 F
116 Feature Manual
Conditions
• Certain resources which are assigned a floating extension number can also be assigned a name.
Programming References
PC Programming Manual
2.8.8 [2-6-1] Numbering Plan—Main—Extension
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Main
→ Floating Extension Number
→ Group Name
2.9.16 [3-7-2] VM(DPT) Group—Unit Settings—Floating Extension No.
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings—Floating Ext. No.
2.9.21 [3-9] PS Ring Group—Floating Extension Number
2.11.2 [5-2] External Pager—Page Number 1, Page Number 2—Floating Extension Number
2.11.4 [5-3-2] Voice Message—DISA Message—Floating Extension Number
2.17.1 [11-1] Main—Remote—Remote—Analog Remote (Modem) Floating Extension Number
PT Programming Manual
[623] Incoming Call Distribution Group Name
[660] VM Group Floating Extension Number
[700] External Pager Floating Extension Number
[730] Outgoing Message (OGM) Floating Extension Number
Resource Description Default
Device External Pager Used as the destination for the Trunk Answer From
Any Station (TAFAS) feature. (→ 1.17.2 TAFAS
(Trunk Answer From Any Station))
600
Outgoing Message
(OGM)
Used to play messages for callers via the Direct
Inward System Access (DISA) feature. (→ 1.4.7
DISA (Direct Inward System Access))
5 + two-digit
OGM number
Simplified Voice
Message (SVM)
(KX-TDA50 only)
Used to access message boxes associated with
extensions. (→ 1.16.5 SVM (Simplified Voice
Message))
SVM card 1:
591
SVM card 2:
592
Analog Remote
Maintenance
Used to access PC programming mode through a
modem on a PC.
599
Group Incoming Call
Distribution (ICD)
Group
Used to call an ICD group. (→ 1.9.1 ICD GROUP
FEATURES)
6 + two-digit
group number
PS Ring Group Used to call a PS ring group. (→ 1.13.27 PS Ring
Group)
—
VM (DPT) Group Used to call a VM (DPT) group. 500 (VM [DPT]
Group 1)
VM (DTMF) Group Used to call a VM (DTMF) group. —
To Next Page
Loading...
