Panasonic KX-TDA100 - Call Waiting Tone

1.3 C
50 Feature Manual
Feature Manual References
1.3.3 Call Log, Incoming
1.3.10 Call Waiting Tone
1.12.3 OHCA (Off-hook Call Announcement)
1.16.1 SMDR (Station Message Detail Recording)
1.20.3 Whisper OHCA
Operating Manual References
1.3.12 CALL WAITING FEATURES
1.3.13 Call Waiting Tone
3.1.2 Personal Programming
1.3.10 Call Waiting Tone
Description
When an extension user attempts to call a busy extension (i.e., an extension that is ringing or having a
conversation), a call waiting tone can be sent to the called extension to indicate another call is waiting.
Conditions
• This feature functions only if the called extension has activated call waiting. If it is activated, the calling
extension will hear a ringback tone.
• One of two call waiting tones can be selected (Tone 1 or Tone 2) through personal programming (Call
Waiting Tone Type Selection).
• A PT user can hear different Call Waiting tones for CO line calls and intercom calls if "Tone 2" has
been selected through personal programming (Call Waiting Tone Type Selection). If "Tone 1" has
been selected, the same Call Waiting tone will be heard for both CO line calls and intercom calls.
All Call Waiting tone patterns have a default (→ 2.3 Tones/Ring Tones).
Programming References
PC Programming Manual
2.8.4 [2-3] Timers & Counters—Miscellaneous—Caller ID—Visual Caller ID Display
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature
→ BSS / OHCA / Whisper OHCA / DND Override
→ BSS / OHCA / Whisper OHCA / DND Override-2
2.10.1 [4-1-1] Wired Extension—Extension Settings
→ Option 2—Manual C. Waiting for Extension Call
→ Option 2—Automatic C. Waiting
→ Option 4—Call Waiting Tone Type
2.10.10 [4-2-1] Portable Station—Extension Settings
→ Option 2—Manual C. Waiting for Extension Call
→ Option 2—Automatic C. Waiting
→ Option 4—Call Waiting Tone Type