Panasonic KX-TDA100 - Display Information

1.4 D
86 Feature Manual
Operating Manual References
1.3.18 DISA (Direct Inward System Access)
1.3.72 Walking COS
1.4.8 Display Information
Description
A display proprietary telephone (PT) can relay the following information to the user while making or receiving
calls:
Conditions
• Multilingual Display
Each extension can select its display language through personal programming (Display Language
Selection).
• Display Contrast
The display contrast can be adjusted through personal programming (Display Contrast Selection). This
is available only for digital proprietary telephones (DPTs).
• Display Backlight
Each extension can select its display backlight preference (on or off) through personal programming
(Display Backlight Selection). This is available for the KX-T7633, KX-T7636 and IP-PTs.
• Characters (name) or digits (number) exceeding the display's limitations are not displayed. Although in
this case information may not be displayed properly, the received information is not altered.
Programming References
PC Programming Manual
Display Item Display Example Condition
The extension number and name of the calling or
called extension, or Incoming Call Distribution
(ICD) Group
123: Tom Smith –
Status of the called extension 123: Busy –
The number and name of the optional device Door 02: 1st Door –
The telephone number dialed 1234567890 –
The received call information
a) Caller's name
b) Caller's number
c) CO line number/name
d) Original Destination, if the call is forwarded
e) DID name or number
*
ABC Company
12345678
Line 001: Sales
→102:Mike
Panasonic
*
The first line message can
be either (a), (c), or (e) at
each extension through
system programming.
Duration of the current CO line call Line 001 11:02'28 –
*
Only available for KX-TDA100, KX-TDA200, and KX-TDA600.