Panasonic KX-TDA100 - Operator Features

1.12 O
192 Feature Manual
Conditions
• One-touch Dialing Button
Any flexible button can be customized as a One-touch Dialing button.
• Full One-touch Dialing
There is no need to go off-hook before pressing a One-touch Dialing button.
Programming References
PC Programming Manual
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 5—Flexible Button Programming Mode
2.10.5 [4-1-4] Wired Extension—Flexible Button
→ Ty p e
→ Dial (for One-touch)
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 5—Flexible Button Programming Mode
2.10.13 [4-2-3] Portable Station—Flexible Button
→ Ty p e
→ Dial (for One-touch)
2.10.17 [4-3] DSS Console—Flexible Button
→ Ty p e
→ Dial (for One-touch)
PT Programming Manual
None
Feature Manual References
1.6.3 Flexible Buttons
2.1 Capacity of System Resources
Operating Manual References
1.3.46 One-touch Dialing
1.12.5 Operator Features
Description
Any extension or Incoming Call Distribution (ICD) group can be designated as an operator.
This PBX supports the following types of operators:
Type Description
PBX operator An extension or ICD group can be assigned as a PBX operator for
each time mode (day/lunch/break/night).
Tenant operator An extension or incoming call distribution group can be assigned as a
tenant operator. The tenant operator may be the extension or ICD
group of another tenant.
[Example] Extension 110 in tenant 1 is the tenant operator of tenant 3.