Panasonic KX-TDA100 - Line Preference-Outgoing

1.10 L
176 Feature Manual
Conditions
[Prime Line]
• The priority of the incoming call is as follows:
1) The call arriving at a button on which the "Prime Line" is assigned.
2) The call arriving at the INTERCOM button.
Programming References
PC Programming Manual
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 4—Incoming Preferred Line
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 4—Incoming Preferred Line
PT Programming Manual
None
Operating Manual References
3.1.2 Personal Programming
1.10.3 Line Preference—Outgoing
Description
Through personal programming, a proprietary telephone (PT) user can select the preferred method of
seizing a line (Preferred Line Assignment—Outgoing) that is used each time the user goes off-hook.
Type Description
No Line Selects a line by pressing the desired Line Access button to answer an
incoming call after you go off-hook.
PDN Answers a call arriving at a Primary Directory Number (PDN) button
simply by going off-hook. This works even when multiple calls are
received simultaneously.
(→ 1.13.7 PDN (Primary Directory Number)/SDN (Secondary
Directory Number) Extension)
Prime Line Answers a call arriving at a Flexible CO button (on which the "Prime
Line" is assigned) simply by going off-hook. This works even when
multiple calls are received simultaneously.
Ringing Line (default) Answers the longest ringing call when multiple calls arrive at one's own
telephone simply by going off-hook.