1.6 F
Feature Manual 121
[All Calls and Busy]
• If the forward destination is not available to answer a call, this feature is canceled and the original
destination will ring for the following type of call:
– Doorphone call
– CO line calls via the ELCOT, LCOT, or T1 (LCOT/GCOT) cards
[No Answer and Busy/No Answer]
• No Answer Time
The number of rings before the call is forwarded is programmable for each extension.
[Follow Me]
• This feature is only available when the original extension has disabled the "Deny Remote Operation
by Other Extension" setting on a COS basis.
Programming References
PC Programming Manual
2.8.8 [2-6-1] Numbering Plan—Main—Features—FWD No Answer Timer Set
2.8.11 [2-7-1] Class of Service—COS Settings
→ TRS—Call Forward to CO
→ Extension Feature—Group Forward Set
→ Extension Feature—Remote Operation by Other Extension
2.9.1 [3-1-1] Trunk Group—TRG Settings—Main
→ CO-CO Duration Time
→ Extension-CO Duration Time
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
2.10.3 [4-1-2] Wired Extension—FWD/DND
2.10.12 [4-2-2] Portable Station—FWD / DND
PT Programming Manual
[472] Extension-to-CO Line Call Duration
[473] CO-to-CO Line Call Duration
[504] Call Forwarding to CO Line
[605] Call Forwarding—No Answer Time
Feature Manual References
1.3.19 COS (Class of Service)
1.9.5 ICD Group Features—Overflow
1.9.9 Idle Extension Hunting
1.9.11 Intercept Routing
Operating Manual References
1.3.29 FWD (Call Forwarding)
To Next Page
Loading...
