Panasonic KX-TDA100 - Page 65

1.3 C
Feature Manual 65
Conditions
[General]
• Capable telephone:
DPT: KX-T7600 series PT, USB module
IP-PT
• CTI application software must be installed on the connected PC. In addition, some features may require
a KX-TDA6920, KX-TDA0920, or KX-TDA5920 SD Memory Card for Software Upgrade to Enhanced
Version.
• Application Programming Interface (API)/Protocol
Software used for CTI must support the following protocol(s):
• Operating system requirements for PCs or CTI Servers vary by the CTI software being used. Refer to
your CTI software documentation for more information.
• For Third Party Call Control, it is possible to connect a CTI Server to the Hybrid IP-PBX via either a CTI-
LINK card or USB port. However, both connections cannot be used simultaneously.
[IP-PT Call Control]
• A PC connected directly to an IP-PT cannot be used for First Party Call Control.
• IP-PTs do not support the use of PC Phone or PC Console software on a connected PC.
Installation Manual References
KX-TDA50
2.6.4 First Party Call Control CTI Connection
2.9.1 Connection of Peripherals
KX-TDA100/KX-TDA200
Type API/Protocol
First Party Call Control •TAPI 2.1
Third Party Call Control • ECMA CSTA Phase 3
•TAPI 2.1
PBX
CTI
Interface
CTI Server
PC
PC
LAN
LAN or USB