Panasonic KX-TDA50

1.4 During a Conversation
User Manual 65
To disconnect one party and then talk to the other in a three-party conversation
Unattended Conference
The person who originated a conference can leave the conference, and allow the other parties to continue
the conversation.
To leave a conference
• * In this case, the FLASH/RECALL button on a proprietary telephone must be in Flash/Recall
mode. For information about setting the mode of your FLASH/RECALL button, consult your
dealer.
• During a three-party conversation, pressing the TRANSFER button or Recall/hookswitch
alternates between the two other parties in the conversation.
• You can have a conference with a maximum of eight parties (comprising intercom or CO lines)
simultaneously.
• During a conversation involving four or more parties, you cannot disconnect one party and
maintain the conversation with the other parties.
Customizing Your Phone
• 3.1.3 Customizing the Buttons
Create or edit a Conference button.
PT/PS
Press TRANSFER once
or twice to establish a
conversation with the
party to be disconnected.
TRANSFER
During a conversation
Press FLASH/RECALL .*
FLASH/
RECALL
Press the flashing CO or
INTERCOM corresponding
to the party on hold.
OR
(CO)
INTERCOM
Talk.
The other party will be put on hold.
PT/PS
Press CONF .
During 3- to 7-party conference
CONF
On-hook.