1.9 User-supplied Equipment
User Manual 99
1.9.5 Voice Processing System
You or an outside party can access the Voice Processing System from a telephone.
– Call Forwarding to Voice Mail (Voice Mail Integration)
If your PBX has a Panasonic Voice Processing System connected (e.g., KX-TVS series) using digital
integration, the following features are also available:
– Live Call Screening (LCS)
– Two-way Record
Call Forwarding to Voice Mail (Voice Mail Integration)
– To forward your calls to your mailbox
– To transfer a call to a mailbox
– To listen to messages
If you cannot answer calls, you can forward them to your mailbox. You can select the type of incoming calls
(Intercom Calls/Outside Calls/Both Calls) that are forwarded.
If your telephone has a Message button, the Message light turns on when a message is left in your mailbox.
You will hear an indication tone* when going off-hook, regardless of whether or not your telephone has a
Message button.
You can also transfer received outside calls to a mailbox so that calling parties can leave messages. If you
create a Voice Mail Transfer button on your phone, the transfer is done without knowing the mailbox number
(Voice Mail Transfer).
The duration for recording depends on the voice processing system.
• In this case, the FLASH/RECALL button on a proprietary telephone must be in External Feature
Access (EFA) mode. For information about setting the mode of your FLASH/RECALL button,
consult your dealer.
• Regarding the service code, consult your dealer.
Customizing Your Phone
• 3.1.3 Customizing the Buttons
Create or edit an External Feature Access (EFA) button.
To Next Page
Loading...
