Panasonic KX-TDE100 - Page 1010

• 4.8 [2-5] Holiday Table
• 4.14 [2-7-3] Class of Service—Internal Call Block
• 5.7 [3-2] User Group
• 5.13 [3-5-1] Incoming Call Distribution Group—Group Settings—Main— Tenant Number
• 6.1 [4-1-1] Wired Extension—Extension Settings—Main— User Group
• 6.10 [4-2-1] Portable Station—Extension Settings—Main— User Group
• 7.1 [5-1] Doorphone— Tenant Number
• 7.7 [5-5] External Sensor— Tenant No.
• 8.6 [6-6] Tenant
• Section 10 [8] ARS
• 10.6 [8-5] Carrier—Authorisation Code for Tenant
• 12.2 [10-2] DIL Table & Port Settings—DIL— Tenant Number
• 12.3 [10-3] DDI / DID Table— Tenant Number
• 12.6 [10-4] MSN Table—MSN— Tenant Number
Feature Guide References
2.2.3 Tenant Service
Three-party Conference (3PTY)—by ISDN
• 3.33
[1-1] Slot—Port Property - BRI Port—Supplementary Service—
COLP, CLIR, COLR, CNIP, CONP,
CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY
• 3.35
[1-1] Slot—Port Property - PRI Port—Supplementary Service—
COLP, CLIR, COLR, CNIP, CONP,
CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, E911, 3PTY
Feature Guide References
1.21.1.8 Three-party Conference (3PTY)—by ISDN
TIE Line Service
• 3.33 [1-1] Slot—Port Property - BRI Port—Network Numbering Plan—
Trunk Property
• 3.35 [1-1] Slot—Port Property - PRI Port—Network Numbering Plan— Trunk Property
• 3.38 [1-1] Slot—Port Property - T1 Port— Trunk Property
• 3.44 [1-1] Slot—Port Property - E1 Port— Trunk Property
• 3.47 [1-1] Slot—Port Property - EM Port— Trunk Property
• 4.5 [2-3] Timers & Counters—Miscellaneous— Incoming Call Inter-digit Timer—TIE
• 4.9 [2-6-1] Numbering Plan—Main—Features
– Idle Line Access (Local Access)
– Trunk Group Access
– TIE Line Access
• 4.9 [2-6-1] Numbering Plan—Main—Other PBX Extension
• 4.10
[2-6-2] Numbering Plan—Quick Dial—
Use quick dial for rerouting to public CO when TIE line does
not work
• 4.12 [2-7-1] Class of Service—COS Settings—TRS— TRS Level—Day, Lunch, Break, Night
• 4.18
[2-9] System Options—Option 4—
Private Network—TIE Call
by Extension Numbering (Activation
Key Required)
• 5.1 [3-1-1] Trunk Group—TRG Settings—Main—
COS
• 11.1 [9-1] TIE Table
• 12.2 [10-2] DIL Table & Port Settings
– DIL— Trunk Property
– DIL— DIL Destination—Day, Lunch, Break, Night
– DDI / DID / TIE / MSN
• 12.3 [10-3] DDI / DID Table— DDI / DID Destination—Day, Lunch, Break, Night
1010 PC Programming Manual
Feature Programming References