Panasonic KX-TDE100

3.32 [1-1] Slot—Card Property - BRI type/PRI type
The properties of the BRI or PRI card can be specified.
ISDN CO / QSIG Master / QSIG Slave—T200
Specifies the maximum time that the PBX waits for a reply after sending the L2 command to ISDN.
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.32 [1-1] Slot—Card Property - BRI type/PRI type
Programming Manual References
None
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T202
Specifies the
maximum time that the PBX waits for a reply after resending the request to use an ISDN line as
a TIE line.
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.32 [1-1] Slot—Card Property - BRI type/PRI type
Programming Manual References
None
Feature Guide References
1.30.1 TIE Line Service
ISDN CO / QSIG Master / QSIG Slave—T203
Specifies the length of time to detect no communication status of L2.
Value Range
0–600 ´ 100 ms
PC Programming Manual 265
3.32 [1-1] Slot—Card Property - BRI type/PRI type