13.5 [11-4-2] SNMP—Manager
It is
possible to assign up to two PCs as SNMP managers. The settings related to SNMP manager activity can
be programmed for each SNMP manager, indicated as No.1 and No.2 on the screen.
This option is only available at Installer level.
Manager IP Address
Specifies the IP address of an SNMP manager.
Value Range
0.0.0.0–223.255.255.255
Maintenance Console Location
13.5 [11-4-2] SNMP—Manager
Programming Manual References
None
Feature Guide References
2.4.4 Simple Network Management Protocol (SNMP) System Monitor
Community Name
Specifies a community name of an SNMP manager.
Value Range
Max. 255 characters
Maintenance Console Location
13.5 [11-4-2] SNMP—Manager
Programming Manual References
None
Feature Guide References
2.4.4 Simple Network Management Protocol (SNMP) System Monitor
TRAP Port Number (Send)
Specifies a port number used to send TRAP to an SNMP manager.
Value Range
1–65535
958 PC Programming Manual
13.5 [11-4-2] SNMP—Manager
To Next Page
Loading...
