Panasonic KX-TDE100

Programming Manual References
None
Feature Guide References
None
Flash Timing - Range
Specifies the
maximum length that a signal sent from an SLT can be for the PBX to recognise it as a hookswitch
flash signal.
Value Range
8 ´ n (n=3–191) ms
Maintenance Console Location
3.23 [1-1] Slot—Card Property - Extension Type
Programming Manual References
None
Feature Guide References
None
DTMF-R STD Detection Time
Specifies the minimum length that a DTMF tone must be for the PBX to recognise it as a DTMF tone.
Value Range
2 ´ n (n=1–31) ms
Maintenance Console Location
3.23 [1-1] Slot—Card Property - Extension Type
Programming Manual References
None
Feature Guide References
None
SLT Power Supply
Selects the voltage that enables an SLT to activate the Message Waiting lamp. This setting is only available
with MSLC card.
PC Programming Manual 227
3.23 [1-1] Slot—Card Property - Extension Type