Panasonic KX-TDE100 - Page 909

CLI for DIL
When CLI distribution is enabled for a trunk to which DIL distribution is set, incoming trunk calls will be
distributed to
the CLI destinations (instead of the DIL destinations) if the caller’s identification number is found
in the System Speed Dialling Table.
CLI distribution can be enabled or disabled for each time mode (day/lunch/break/night) on a trunk basis.
Shelf
Indicates the shelf type and/or position (reference only).
Value Range
For KX-TDE100/KX-TDE200:
Physical, Virtual
For KX-TDE600:
Shelf number, Virtual
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
None
Slot
Indicates the slot position of each trunk card (reference only).
Value Range
Slot number
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
None
Port
Indicates the port number (reference only).
PC Programming Manual 909
12.2 [10-2] DIL Table & Port Settings