To Next PageTo Next PageWhat does a slowly flashing indicator mean on my Panasonic Cordless Telephone?
If the indicator on the handset of your Panasonic Cordless Telephone flashes slowly, it means new messages or new voice mail messages have been recorded. Listen to the new messages or listen to the new voice mail messages.
Why is my Panasonic Cordless Telephone battery flashing after charging?
If you fully charged the batteries of your Panasonic Cordless Telephone, but the battery icon still flashes, the display shows '0', or the operating time is shorter, clean the battery ends and the charge contacts with a dry cloth and charge again. If the issue persists, it may be time to replace the batteries.
Why does my Panasonic Cordless Telephone beep and flash?
If your Panasonic Cordless Telephone handset beeps and/or the phone icon flashes, it indicates that the battery charge is low. You should fully charge the batteries.
Why is caller ID not showing on my Panasonic Cordless Telephone?
If the caller information is not displayed on your Panasonic Cordless Telephone, ensure you subscribe to Caller ID service. If you are subscribed, and your unit is connected to additional telephone equipment, plug the unit directly into the wall jack. If you use a DSL/ADSL service, use a DSL/ADSL filter. Note that the name display service may not be available in some areas. Also, other telephone equipment may be interfering with the unit.
What to do if Panasonic Cordless Telephone handset does not turn on?
If the handset of your Panasonic Cordless Telephone doesn't turn on even after installing charged batteries, place the handset on the base unit or charger to turn it on.
Why can't I make calls on my Panasonic Cordless Telephone?
If you cannot make a call with your Panasonic Cordless Telephone, the dialing mode may be set incorrectly; try changing the setting. Also, ensure the handset is not too far from the base unit and move closer to the base unit.
Why is my Panasonic Cordless Telephone not recording messages?
If your Panasonic Cordless Telephone does not record new messages, first check if the answering system is turned off and turn it on. If the message memory is full, erase unnecessary messages. Also, verify that the recording time isn't set to “Greeting only”, and change the setting if it is. If you subscribe to a voice mail service, messages are recorded by your service provider, so you may need to adjust the number of rings or contact your service provider.
What to do if my Panasonic Cordless Telephone displays only an underscore?
If your Panasonic Cordless Telephone displays only an underscore '_', it could mean the handset is too far from the base unit, so move closer. Another reason might be that the base unit's AC adaptor isn't properly connected; try reconnecting it. Also, ensure the handset is registered to the base unit.
Why is there noise on my Panasonic Cordless Telephone?
If you're hearing noise or the sound cuts in and out on your Panasonic Cordless Telephone, it could be due to electrical interference. Try repositioning the base unit and using the handset away from sources of interference. Alternatively, move closer to the base unit. If you have DSL/ADSL, consider using a DSL/ADSL filter between the base unit and the telephone line jack.
How to correct the time on my Panasonic Cordless Telephone?
If the time on your Panasonic Cordless Telephone has shifted, it could be due to incorrect time information from incoming Caller ID. Set the time adjustment to “Manual” (off).
General| Number of Handsets | 1 |
|---|---|
| Answering Machine Recording Time | 18 minutes |
| Caller ID | Yes |
| Phonebook Capacity | 50 entries |
| Display | LCD |
| Ringtones | Polyphonic |
| Frequency | 1.9 GHz |
| Speakerphone | Yes |
| Ringer ID | Yes |
| Call Waiting Caller ID | Yes |
| Intercom | Yes |
| Expandable | Yes |
| Type | Cordless Phone |
| Multiple Handsets | Up to 6 |
| Range | Up to 1000 feet outdoors |
