107
3. Press [CALL] to dial the number.
Note:
• When storing a calling card access number and
your PIN in the phonebook as one phonebook
entry, press [PAUSE] to add pauses after the
number and PIN as necessary (page 74).
• If you have rotary/pulse service, you need to
press [*] (TONE) before pressing [MENU] on the
handset in step 1 to change the dialing mode
temporarily to tone. When adding entries to the
phonebook, we recommend adding [*] (TONE) to
the beginning of phone numbers you wish to chain
dial (page 106).
To Next Page
Loading...
