88
[SP-PHONE] on the base unit.
– When only 1 cellular phone is registered or the
line is set to make cellular calls (page 70),
press [CELL] on the handset, then press [SP-
PHONE] on the base unit.
If the handset is on the base unit, simply lift it.
Adjusting the speaker volume
Press [+] or [-] repeatedly while talking.
Redialing the last number dialed
1. Press [CELL 1] or [CELL 2].
2. [REDIAL]
Making landline calls
1. [SP-PHONE]
2. Dial the phone number.
3. When the other party answers, speak into the
microphone.
4. When you finish talking, press [SP-PHONE].
To Next Page
Loading...
