195
Error messages
Display message: Base no power or No link. Re-
connect base AC adaptor.
Cause/solution:
• The handset has lost communication with the base
unit. Move closer to the base unit and try again.
• Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
• The handset’s registration may have been
canceled. Re-register the handset (page 151).
Display message: Busy
Cause/solution:
• No cellular phone is registered to the base unit.
Register a cellular phone (page 56).
• The called unit is in use.
• Other units are in use and the system is busy. Try
again later.
• The handset you are using is too far from the base
unit. Move closer and try again.
To Next Page
Loading...
