133
[EDIT] then Edit the phone number. then
[SAVE] then [OFF]
To erase a number:
[ERASE] then : “Yes” then [SELECT]
then [OFF]
Note:
• When editing, press the desired dial key to add,
[CLEAR] to erase.
• When viewing, “
Block w/o num” is displayed if
the blocking incoming calls without phone number
feature is turned on.
To turn the feature off: [ERASE] then then
[SAVE] then [OFF]
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base unit.
To Next Page
Loading...
