62
To use the handset ringer tone instead of
your cellular phone’s ringer tone
Select “Off” in step 3, “Ring as cell mode”, page
59. To change the handset ringer tone for a cellular
line, see page 112.
Auto connection to the cellular phone
After registration, your cellular phone is connected to
the base unit. If you move the cellular phone out of
base unit range, the cellular phone is disconnected
from the base unit. This feature allows the base unit
to try to reconnect the cellular phone at regular
intervals when it returns within base unit range. You
can set the interval. The default setting is “
1 min”.
Important:
• When you are using a cellular line or a Bluetooth
headset, the base unit loses its connection from
other Bluetooth devices (cellular phone or
headset). To automatically resume the connection
to cellular phones, leave the auto connection on.
• Some cellular phones lose connection after usage,
please check the specification of your cellular
phone for more details.
To Next Page
Loading...
