58
3. Handset:
Wait until a long beep sounds.
It may take more than 10 seconds to complete
registration.
When the CELL 1 or CELL 2 indicator lights
green, the cellular phone is connected to the
base unit. You are ready to make cellular calls.
4. To select which unit receives calls for the cellular
line, press [OK] then continue from step 3,
“Selecting which unit receives cellular calls”,
page 59.
If not required, go to step 5.
5. [OFF]
Note:
• Make sure that your cellular phone is set to
connect to this product automatically. Refer to
your cellular phone’s operating instructions.
• Make sure you cancel your cellular phone’s current
registration if you want to register it to the other
line (page 69).
To Next Page
Loading...
