134
Important:
• See page 13 for information on the available
model.
Registering a handset to the base unit
The supplied handset and base unit are pre-
registered. If for some reason the handset is not
registered to the base unit, re-register the handset.
1. Handset: [MENU] [#][1][3][0]
2. Base unit:
Press and hold [LOCATOR] for about 5 seconds
until the registration tone sounds.
If all registered handsets start ringing, press
[LOCATOR] again to stop, then repeat this
step.
The next step must be completed within 90
seconds.
3. Handset:
Press [OK], then wait until a long beep sounds.
To Next Page
Loading...
