66
When you use the landline again
Before connecting the telephone line to the base
unit, select “
Off” in step 2, “Cellular line only mode
(If you do not use the landline)”, page 64.
Cellular line selection
This feature determines which cellular line is selected
to make cellular calls when:
– you press [CELL] on the handset.
– you press or on the handset while the
cellular line only mode is turned on.
– you press [SP-PHONE] on the base unit while the
cellular line only mode is turned on. (KX-TG7741
series: page 7)
The following settings are available:
– “
Manual” (handset only: default): You can select
the desired cellular line when making a call.
– “Cellular phone 1” (base unit default): CELL 1 is
selected.
To Next Page
Loading...
