217
you have forgotten your remote access code,
enter the remote access code setting to check
your current code (page 182).
• The answering system is turned off. Turn it on
(page 169).
• You cannot operate the answering system when
calling a cellular phone registered to the base unit.
Bluetooth PIN
Problem: I cannot remember the PIN.
Cause/solution:
• Change the PIN using the following method.
1. [MENU] [#][6][1][9]
2. [*][7][0][0][0]
3. Enter the new 4-digit PIN. then [OK]
4. Enter the new 4-digit PIN again. then [SAVE]
then [OFF]
To Next Page
Loading...
