Panasonic KX-TG7731 - Erasing All Caller Information; Erasing Selected Caller Information

145
To activate this feature, you must edit an entry in
the caller list, then call that number. After that,
phone numbers from that caller’s area code are
edited automatically.
This feature can be set for each handset (page 122).
The default setting is “
On”.
Note:
• Phone numbers from the 4 most recently edited
area codes are automatically edited.
Erasing selected caller information
1. CID
2. : Select the desired entry.
3. [ERASE] then : “
Yes”
4. [SELECT] then [OFF]
Erasing all caller information
1. CID