57
• Before registering a Bluetooth enabled cellular
phone to the base unit:
– we recommend you change the PIN (page 68).
– make sure that no Bluetooth device such as a
Bluetooth headset is connected to your cellular
phone.
1. Handset:
[MENU]
For CELL 1: [#][6][2][4][1]
For CELL 2: [#][6][2][4][2]
After the CELL 1 or CELL 2 indicator on the
base unit starts flashing red, the rest of the
procedure must be completed within 5
minutes.
2. Your cellular phone:
While the CELL 1 or CELL 2 indicator is flashing
red, follow the instructions of your cellular phone
to enter the registration mode.
Depending on your cellular phone, it may ask
you to enter the base unit PIN (default:
“0000”).
To Next Page
Loading...
