Speed dial
You can assign 1 phone number to each of
the dial keys (1 to 9) on the handset.
Adding phone numbers to speed
dial keys
n By entering phone numbers:
1 Press and hold the desired speed dial
key (1 to 9). a MADDN
2 MbN: “Manual” a MSELECTN
3 Enter the party’s name (16 characters
max.). a MOKN
4 Enter the party’s phone number (24
digits max.). a MOKN
5 MSELECTN a MOFFN
n From the shared phonebook:
1 Press and hold the desired speed dial
key (1 to 9). a MADDN
2 MbN: “Phonebook” a MSELECTN
3 MbN: Select the desired entry.
4 MSAVEN a MOFFN
Note:
R If you edit a phonebook entry which is
assigned to a speed dial key, the edited
entry does not transfer to the speed dial
key.
Editing an entry
1 Press and hold the desired speed dial key
(1 to 9). a MMENUN
2 MbN: “Edit” a MSELECTN
3 Edit the name if necessary (16 characters
max.; page 33). a MOKN
4 Edit the phone number if necessary (24
digits max.). a MOKN
5 MSELECTN a MOFFN
Erasing an entry
1 Press and hold the desired speed dial key
(1 to 9). a MMENUN
2 MbN: “Erase” a MSELECTN
3 MbN: “Yes” a MSELECTN
4 MOFFN
Viewing speed dial key
assignments
You can see the speed dial key assignments
on the handset display.
Press and hold the desired speed dial key (1
to 9).
Making a call using a speed dial
key
n Using a cellular line:
1 Press and hold the desired speed dial
key (1 to 9).
2 MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 21).
3 MbN: Select the desired cellular phone.
a MSELECTN
n Using the landline:
1 Press and hold the desired speed dial
key (1 to 9).
2 M
N
36
Speed Dial
To Next Page
Loading...
