Erasing all messages
Press MERASEN 2 times while the unit is not in
use.
Listening to messages
using the handset
When new messages have been recorded,
“New message” is displayed.
1 To listen to new messages:
MMENUN#323
To listen to all messages:
MMENUN#324
2 When finished, press MOFFN.
Note:
R To switch to the receiver, press M
N.
R In step 1, the following soft key is also
available to listen to new messages.
When a cellular phone is paired:
MMENUN a MPLAYN
*1
When a cellular phone is not paired:
MPLAYN
*1
*1 If there are no new messages in the
answering system, MPLAYN is not
displayed.
Operating the answering system
MMENUN a MbN: “Answering device” a
MSELECTN
Key Operation
MDN or MCN Adjust the receiver/speaker
volume (during playback)
1 or MFN Repeat message (during
playback)
*1
2 or MEN Skip message (during
playback)
3 Enter the “Settings” menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
Key Operation
8 Turn answering system on
MPAUSEN
Pause message
*2
9 or
MSTOPN
Stop recording
Stop playback
0 Turn answering system off
*4
*3
Erase currently playing
message
*5 Erase all messages
*6 Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
MbN: “Playback” a MSELECTN
*3 You can also erase as follows:
MPAUSEN a MbN: “Erase” a
MSELECTN a MbN: “Yes” a MSELECTN
Calling back (Call Display
subscribers only)
If caller information is received for the call, you
can call the caller back while listening to a
message.
1 Press MPAUSEN during playback.
2 MbN: “Call back” a MSELECTN
Editing the number before calling back
1 Press MPAUSEN during playback.
2 MbN: “Edit & Call” a MSELECTN
3 Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 53). a M
N
R To call back using a cellular line,
continue from step 2, “Making cellular
calls”, page 22.
Erasing all messages
1 MMENUN#325
2 MbN: “Yes” a MSELECTN a MOFFN
61
Answering System for Landline