Displayed
option
Function
Conference
Answers the waiting call
and combines it with the
current call to make a
conference call (3-party
call).
Return
Returns to the waiting
caller while keeping the
current call on hold.
Drop caller1
Disconnects (drops) the
1st call during a
conference call.
Drop caller2
Disconnects (drops) the
2nd call during a
conference call.
To use Call Waiting Deluxe service
Handset / Base unit
1 When you hear a Call Waiting tone during
an outside call, press MFLASHN.
R The option menu is displayed.
2 MbN: Select the desired option. a
MSELECTN
R After selecting “Answer”, “Hold”, or
“Conference”, you can select
another option. a MFLASHN a MbN:
Select the desired option. a
MSELECTN
Note:
R To exit from the option menu, wait for 20
seconds.
Caller list
Important:
R Only 1 person can access the caller list at a
time.
R Make sure the unit’s date and time setting
is correct (page 17).
Viewing the caller list and calling
back
n Using a cellular line
Handset
1 MCN CID
2 Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3 To call back, press MSELECTN.
To exit, press MOFFN.
4 MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 21).
5 MbN: Select the desired cellular phone. a
MSELECTN
Base unit
1 MCIDN
2 Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3 To call back, press MCELL 1N or MCELL
2N.
To exit, press MEXITN.
n Using the landline
Handset / Base unit
1 Proceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
2 Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3 Proceed with the operation for your unit.
Handset:
– To call back, press M
N.
– To exit, press MOFFN.
Base unit:
– To call back, press MZN.
– To exit, press MEXITN.
Note for handset and base unit:
R If the entry has already been viewed or
answered, “
” is displayed, even if it was
viewed or answered using another unit.
R In step 2 for handset or step 2 for base unit,
if
is displayed, not all of the information is
shown. To see the remaining information:
Handset:
Press MEN.
To return to the previous screen, press MFN.
52
Call Display Service
To Next Page
Loading...
