Intercom
Intercom calls can be made:
– between handsets
– between a handset and the base unit
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, you hear 2 tones.
– To answer the call with the handset,
press MOFFN, then press M
N.
– To answer the call with the base unit,
press MZN 2 times.
Making an intercom call
Handset
1 MMENUN a MbN: “Intercom” a
MSELECTN
2 MbN: Select the desired unit. a MSELECTN
R To stop paging, press MOFFN.
3 When you finish talking, press MOFFN.
Note:
R In step 1, the following soft key is also
available to make an intercom call.
When a cellular phone is paired:
MMENUN a MINTN
*1
When a cellular phone is not paired:
MINTN
*1
*1 If there is a new message in the Voice
Mail or answering system, MINTN is not
displayed.
Base unit
1 Press MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
R To stop paging, press MINTERCOMN.
2 When you finish talking, press
MINTERCOMN.
Answering an intercom call
Handset
1 Press M
N to answer the page.
2 When you finish talking, press MOFFN.
Base unit
1 Press MINTERCOMN to answer the page.
2 When you finish talking, press
MINTERCOMN.
Handset locator
You can locate a misplaced handset by
paging it.
1 Base unit: Press MLOCATORN.
R All registered handsets beep for 1
minute.
2 To stop paging:
Base unit:
Press MLOCATORN.
Handset:
Press M
N, then press MOFFN.
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can be
made:
– between 2 handsets
– between a handset and the base unit
Handset
1 During an outside call, press MMENUN to
put the call on hold.
2 MbN: “Intercom” a MSELECTN
3 MbN: Select the desired unit. a MSELECTN
4 Wait for the paged party to answer.
R If the paged party does not answer,
press M
N to return to the outside
call.
68
Intercom/Locator
To Next Page
Loading...
