*1 This is called first ring. If you do not want
the first ring to sound, turn this setting to
“Off” (page 48).
Important:
R When the unit receives a call from a
number that is stored in the call block list or
a call without a recognized phone number,
the call is logged in the caller list
(page 52) with
after the call is
disconnected.
R You can program this setting using either
the base unit or one of the handsets.
Storing unwanted callers
You can store up to 250 phone numbers in the
call block list.
Important:
R We recommend storing 10 digits (including
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
n From the caller list:
Handset
n When a cellular phone is paired:
1 MCN CID
2 MbN: Select the entry to be blocked. a
MSELECTN
R To edit the number, press *
repeatedly until the phone number
is shown in the 10-digit format.
3 MSAVEN
4 MbN: “Call block” a MSELECTN
5 MbN: “Yes” a MSELECTN
6 Edit the phone number if necessary
(24 digits max.).
7 MSAVEN a MOFFN
n When a cellular phone is not paired:
1 MCN CID
2 MbN: Select the entry to be blocked.
R To edit the number: MMENUN a
MbN: “Edit” a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the
10-digit format. And then, press
MSAVEN. Go to step 5.
3 MMENUN
4 MbN: “Save CID” a MSELECTN
5 MbN: “Call block” a MSELECTN
6 MbN: “Yes” a MSELECTN
7 Edit the phone number if necessary
(24 digits max.).
8 MSAVEN a MOFFN
Base unit
1 MCIDN
2 MbN: Select the entry to be blocked.
R To edit the number, press MEDITN
repeatedly until the phone number is
shown in the 10-digit format.
3 MSAVEN
4 MbN: “Call block” a MSELECTN
5 MbN: “Yes” a MSELECTN
6 Edit the phone number if necessary (24
digits max.).
7 MSAVEN a MEXITN
n By entering phone numbers:
Handset
1 MMENUN#217
2 MMENUN a MbN: “Add” a MSELECTN
3 Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
4 MSAVEN a MOFFN
Base unit
1 MMENUN#217 a MADDN
2 Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
3 MSAVEN a MEXITN
Blocking incoming calls without
phone number
You can reject a call when no phone number
is provided, such as a call just showing
“Unavailable”.
47
Programming
To Next Page
Loading...
