Erasing all caller information
Handset / Base unit
1 Proceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
2 MERASEN a MbN: “Yes” a MSELECTN
3 Handset: MOFFN
Storing caller information to the
phonebook
Handset
n When a cellular phone is paired:
1 MCN CID
2 MbN: Select the desired entry.
R To edit the number, press
MSELECTN, then press *
repeatedly until the phone number
is shown in the desired format.
3 MSAVEN
4 MbN: “Phonebook” a MSELECTN
5 Continue from step 3, “Editing entries”,
page 35.
n When a cellular phone is not paired:
1 MCN CID
2 MbN: Select the desired entry.
R To edit the number: MMENUN a
MbN: “Edit” a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the
desired format. And then, press
MSAVEN. Go to step 5.
3 MMENUN
4 MbN: “Save CID” a MSELECTN
5 MbN: “Phonebook” a MSELECTN
6 Continue from step 3, “Editing entries”,
page 35.
Base unit
1 MCIDN
2 MbN: Select the desired entry.
R To edit the number, press MEDITN
repeatedly until the phone number is
shown in the desired format.
3 MSAVEN
4 MbN: “Phonebook” a MSELECTN
5 MEXITN
Note for base unit:
R If you stored caller information to the
phonebook using the base unit, the entry is
automatically assigned to “Home”.
R If you want to edit the caller name, you can
do so using the handset (page 35).
54
Call Display Service
To Next Page
Loading...
