Panasonic LIQI - Parameter Class 5 Setup

LIQI
Page 12
Class (5)
Pr5.00
Range Default Unit
0 -
Pr5.01
Range Default Unit
0 -
Pr5.02
Range Default Unit
0 -
Pr5.03 Denominator of pulse output division
Range Default Unit
0 – 262144 0 -
Pr5.04 Over-travel inhibit input setup
Range Default Unit
0 – 2 1 -
Operation
0
[1] Disable POT, NOT
2
Pr5.05 Sequence at over-travel inhibit
Range Default Unit
0 – 2 0 -
Pr5.06 Sequence at servo-off
Range Default Unit
0 – 9 0 -
Pr5.07 Sequence at main power off
Range Default Unit
0 – 9 0 -
* for more detail please refer Panasonic A5 manual
2
nd
Numerator of electronic gear
0 –
1073741824
3
rd
Numerator of electronic gear
0 –
1073741824
4
th
Numerator of electronic gear
0 –
1073741824
Setup
Value
POT  Inhibit of positive direction travel
NOT  Inhibit of negative direction travel
POT or NOT inputs actives Err38.0 Run inhibit input
protection