18
6 Service Mode
6.1. Error Code Memory Function
1. General description
This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the
latest. When the error is occurred more than 16, the oldest error is overwritten in sequence.
The error code is not memorized when the power supply is shut down forcibly (i.e.,when the unit is powered on by the battery,
the battery is pulled out) The error code is memorized to Flash ROM when the unit has just before powered off.
2. How to display
The error code can be displayed by ordering the following procedure:
• Preparation:
a. Attach the fully charged Battery, and insert the memory card (32MB or more).
b. Set the [ Mode dial ] to "[ P ](Program AE mode)".
* If the mode dial position is other than "[ P ](Program AE mode)", it does not display the initial settings menu.
• Step 1. The temporary cancellation of "INITIAL SETTINGS":
While keep pressing "[ RIGHT ] of Cursor button", [ MENU/SET ] button and [ DISPLAY ] button simultaneously, turn the
Power on.
• Step 2. Execute the error code display mode:
Press the "[ PLAYBACK ] button, "[ LEFT ] of Cursor button" and [ MENU/SET ] button simultaneously.
The display is changed as shown below when the above buttons are pressed simultaneously.
Normal display
Error code display CAMERA INFO Normal display .....
To Next Page
Loading...
Need help?
General
