12
3.5.2. INITIAL SETTINGS:
After replacing the Main P.C.B. and/or Flash-ROM, make sure to perform the initial settings after achieving the adjustment by
ordering the following procedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTION.
2. PROCEDURES:
Precautions: Read the above "CAUTION" carefully.
Preparation:
a. Attach the fully charged Battery and insert the memory card (32MB or more).
b. Set the [ Mode dial ] to "[ P ](Program AE mode)".
* If the mode dial position is other than "[ P ](Program AE mode)", it does not display the initial settings menu.
• Step 1. The temporary cancellation of "INITIAL SETTINGS":
While keep pressing "[ RIGHT ] of Cursor button", [ MENU/SET ] button and [ DISPLAY ] button simultaneously, turn the Power
on.
• Step 2. The cancellation of "INITIAL SETTINGS":
Press [ PLAYBACK ] button to switch to the playback screen. (Keep pressing the button.)
Press "[ UP ] of Cursor button" additionally, then turn the Power off.
The LCD displays the " ! " mark before the unit powers down.
• Step 3. Turn the Power on:
Turn the Power on.
To Next Page
Loading...
