Others
.,;,;~~;j~~~~;~M;~!;~~~~~;~~~;R~~~~I!i;§j~~r~W~:~~~{mJml}lll!!',!j:';'II;I!I,ll"i'~·.'!;i'W;i:T:,:!,
• The LCD monitor turns off and the status indicator lights when [AUTO LCD OFF] (P23)
is
selected for the [ECONOMY] mode.
[This does not happen when using the
AC
adaptor (DMW-AC5PP; optional).]
If
the remaining battery power
is
low, it may take longer for the flash to be charged, and the time
during which the LCD monitor
is
turned off may become longer.
!;{I~!'l~;'~~~~.·
••.
~.~.~~!~~;;~~~~m~~l~~~.~~~;~r·;~~~~~~~;!j,t~~,~:m.gm~~t~~lJf.:~~~~··~f,·l)i··,i·!:··
••......
,"
"".
..
• This phenomenon appears when you press the shutter button halfway to set the aperture value
and does not affect the recorded pictures.
• This phenomenon also appears when the brightness changes when the camera
is
zoomed or
when the camera
is
moved. This is because of operation of the automatic aperture of the
camera, and it is not a malfunction.
t!U!~~'~~~;i~~m~·
'.'
• The LCD monitor may flicker for a few seconds after turning the camera on indoors under
fluorescent light. This is not a malfunction.
.
'1~t:~~!;~~;;,Im;~,,,,.<
..
~Nj,)~~!~~!~;~i,~~il'~rr;~:;'
~
Adjust the brightness of the screen. (P21)
• [POWER LCD] or [HIGH ANGLE]
is
activated. (P22)
• This is not a malfunction.
These pixels do not affect the recorded pictures.
·In
dark places, noise may appear to maintain the brightness of the LCD monitor. This does not
affect the pictures you are recording.
·Is
the flash setting set to
[@]?
~
Change the flash setting. (P39)
•
Flash
mode
is
not
available
when
auto
bracket
(P46)
or
[BURST]
(P6S)
in
[REG]
mode
menu
has
been
set.
• The flash is activated twice when red-eye reduction (P40) has been set.
• [ROTATE DISP.] (P78) is set to [ON].
•
You
can rotate pictures with the [ROTATE] function. (P78)
100 VQT1M97
To Next Page
Loading...
Need help?
General
