Others
-Is
[AF ASSIST LAMP] on the [REC] mode menu set to [ON]? (P67)
- The AF assist lamp does not turn on
in
bright places.
- The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
- When the brightness changes due to zoom
or
camera movement etc., the lens may click and
the picture on the screen may drastically change. However, the picture
is
not affected. The
sound is caused by the automatic adjustment of the aperture. This
is
not a malfunction.
- If you do not use the camera for a long time, the clock may be reset.
~
When the message [PLEASE SET THE CLOCK] appears, set the clock again. When you
take a picture before setting the clock, [0:00
O.
O.
0]
is recorded. (P17)
- At some magnification levels, the pictures taken are slightly distorted or the outlines and other
areas
in
the pictures taken are colored, but this is not a malfunction.
- When using the extended optical zoom, the zooming action will stop temporarily near [W]. This
is
not a malfunction.
- When you perform an operation after taking a certain action, the pictures may be recorded
in
folders with different numbers from the ones used prior to the operation. (P84)
-If
the battery was inserted or removed without first turning the camera's power off, the folder
and file numbers for the pictures taken will not be stored
in
the memory. When the power is then
turned back
on
and pictures are taken, they may be stored under file numbers which should
have been assigned to previous pictures.
-Check
the clock (P16) and birthday settings (P51).
-
The
lens
barrel
retracts
about
15
seconds
after
switching
from
[REG]
mode
to
[PLAYBACK]
mode.
VQT1M97 103
To Next Page
Loading...
Need help?
General
