Preparation
These menu settings make it easier to see the LCD monitor when
you are
in
bright places or when you are holding the camera high
above your head.
[OFF]
~
[AUTO POWER LCD]:
ILCol
[LCD
MODE]
The brightness is adjusted automatically depending on how bright
it
is
around the camera.
~
[POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
~q
[HIGH ANGLE]:
The LCD monitor is easier to see when taking pictures with the
camera held high above your head.
• High angle mode
is
also canceled if
you
turn the camera off or [POWER
SAVE]
is activated.
• The brightness
of
the pictures displayed
on
the LCD monitor
is
increased so some subjects
may appear differently from actuality
on
the LCD monitor.
However,
this does not affect the
recorded pictures.
• The LCD monitor automatically returns
to
normal brightness after
30
seconds when recording
in
Power
LCD
mode. Press any button to make the
LCD
monitor bright again.
•
If
the screen is difficult
to
see because
of
light from the sun etc. shining
on
it,
use your hand or
another object to block the light.
• The number
of
recordable pictures decreases
in
Auto Power
LCD
mode,
Power
LCD
mode and
High angle mode.
This allows you to set the beep and shutter sound.
.»)
[BEEP LEVEL]:
2.. [SHUTTER VOL.]:
[~]
(Muted)
L~]
(Muted)
.»)
[BEEP]
[£(])]
(Low)
[J'l
] (Low)
[£(]l»]
(High)
[2]
(High)
,»8
[BEEP TONE]:
)8
[SHUTTER TONE]:
[04t]/[0~]/[0~]
[)4t]/[)~]/[)~]
I
[(»»
[VOLUME] IAdjust the volume of the speaker to any of 7 levels.
• When
you
connect the camera to a
TV,
the volume of the TV speakers does not change.
Set the pattern of the guide lines displayed when taking pictures.
You
can also set whether or not to have the recording information
EIIJ
[GUIDE LINE)
displayed when the guide lines are displayed. (P38)
[REC. INFO.]: [PATTERN]:
[OFF]/[ON]
[EIIJ]/[~]
• The
[PATTERN]
setting
is
fixed
to
[EIIJ]
in
the intelligent auto mode.
iii [TRAVEL
DATE]
• Refer to
P57
for details.
22 VQT1M97
Set the departure date and the return date of the vacation.
[OFF]/[SET]
To Next Page
Loading...
Need help?
General
