Preparation
You
can conserve the battery life by setting these menus.
et
Z
[POWER SAVE]:
The
camera
is automatically turned off if
the
camera
has
not
been
used
for the time selected on the setting.
ECO
[ECONOMY]
[OFF]/[2MIN.]I[5MIN.]/[10MIN.]
lillI
[AUTO LCD OFF]:
When
taking pictures, the LCD
monitor
is automatically turned off
if the
camera
has not been used for the time selected on the
setting.
[OFF]/[15SEC.]/[30SEC.]
- Press the shutter button halfway or turn the camera off and
on
to cancel [POWER SAVE].
- [POWER SAVE]
is
set to [5MIN.]
in
the intelligent auto mode.
- [POWER SAVE]
is
fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
- The status indicator lights while the LCD monitor
is
turned off. Press any button to turn
on
the
LCD monitor again.
Set
the length of time that the picture is displayed after taking it.
[OFF]
[1SEC.]
~
[AUTO
REVIEW]
[2SEC.]
[HOLD]:
The pictures are displayed until
one
any
of
the buttons
is pressed.
[ZOOM]:
The
picture is displayed for 1
second
and then
enlarged
4x
and displayed for 1
more
second.
- (AUTO REVIEW]
is
activated regardless of its setting when using auto bracket (P46),
[HI-SPEED BURST] (P52)
in
scene mode and [BURST] (P65). (The pictures cannot be
enlarged.)
-In
Intelligent auto mode, the auto review function
is
fixed to [2SEC.].
1m
[NO.
RESET] IReset the file
number
of the next recording
to
0001.
- The folder number is updated and the file number starts from 0001. (P84)
- A folder number between 100 and 999 can
be
assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting
the card (P25) after saving the data
on
a
PC
or elsewhere.
-
To
reset the folder number to 100, format the built-in memory or the card first and then use this
function to reset the file number.
A reset screen for the folder number will then appear. Select [YES] to reset the folder number.
_R
[RESET]
The
[REG]
or
[SETUP] menu settings are reset to the initial
settings.
- When the [RESET] setting is selected during recording, the operation that resets the lens
is
also performed at the same time.
You
will hear the sound of the lens operating but this
is
normal
and not indicative of malfunctioning.
- When [SETUP] menu settings are reset, the following settings are also reset.
In
addition,
[FAVORITE] (P79)
in
[PLAYBACK] mode menu
is
set to [OFF], and
[ROTATE
DISP] (P78)
is
set
to [ON].
VQT1M97 23
To Next Page
Loading...
Need help?
General
