Panasonic Lumix DMC-GF6 - Page 145

145
Recording
You can finely adjust the White Balance when you cannot acquire the desired hue by
setting the White Balance.
1 Select the White Balance and then touch [Adjust.].
2 Drag within the frame to finely adjust.
•
You can finely adjust also by pressing 3/4/2/1 of the
cursor button.
• Select the center point if you are not finely adjusting the White Balance.
3 Touch [Set].
•
If you finely adjust the White Balance to [A] (amber), the White Balance icon on the screen will
change to orange. If you finely adjust the White Balance to [B] (blue), the White Balance icon
on the screen will change to blue.
• If you finely adjust the White Balance to [G] (green) or [M] (magenta), [_] (green) or [`]
(magenta) appears beside the White Balance icon on the screen.
• The White Balance fine adjustment setting is reflected in the picture when using the flash.
• You can finely adjust the White Balance independently for each White Balance item.
• The White Balance fine adjustment setting is memorized even if the camera is turned off.
• The White Balance fine adjustment level returns to the standard setting (center point) in the
following cases.
– When you reset the White Balance in [ ] or [ ]
– When you reset the color temperature manually in [ ]
Finely adjusting the White Balance
2 : A (AMBER: ORANGE)
1 : B (BLUE: BLUISH)
3 : G (GREEN: GREENISH)
4 : M (MAGENTA: REDDISH)
GGG
GGG
AAA
AAAB
BBB
BBB
MMM
MMM
6HW
1
2